Water Based Bitumen Primer Bitümli Likit

AVANT WB PRIMARY Primer; It is a ready-to-use waterproofing auxiliary material obtained by mixing water and bitumen using special methods. AVANT WB PRIMER is used as a primer before bituminous membrane or bituminous insulation application. Thanks to its superior adhesion feature, it forms a film layer on the surface after the water it contains evaporates. It ensures a stronger and gap-free adherence of the insulation material applied on the surface.

Storage Conditions / Shelf Life
  • Freezing in the can should be prevented. Therefore, it should be stored upright in a dry, well-ventilated area away from sunlight, at temperatures between +5℃ and +35℃.
  • A maximum of 4 cans can be stacked on top of each other.
  • Shelf life is 12 months when stored in its original, unopened packaging in a dry and cool place.
Health and Safety Warnings
  • Should be stored out of reach of children.
  • Protective equipment compliant with TS EN 166 Standard for face and eye protection, and TS EN 374 Standard for hand, skin, and body protection should be used.
  • Users should refer to the latest Safety Data Sheets, which include physical, ecological, toxicological, and other safety-related information, for advice on the safe transport, storage, and disposal of chemical products.
Properties Standards Unit Values
Density TS 132 Gr/L cm³ 1.02
Evaporation Residue Ratio TS 132 % 48
Ash Content of Residue TS 132 % 20
Water Content TS 132 % 52
Flammability TS 132 - No ignition or burning
Setting Time TS 132 Hours Maximum 24
Heat Flow (100 ± 3) °C TS 132 - No collapse or flow
Flexibility (0 ± 1/2) °C TS 132 - No cracking or peeling
Open Flame Effect TS 132 - Charred area at application site
Water Resistance TS 132 - Does not return to emulsion
Fire Reaction TS 132 Gr/L cm³ No flame propagation exceeding 150 mm
Other Products
Solvent Based Bitumen Primer
Water Based Single Component Liquid Bitumen
Water Based Bitumen Rubber Single Component